Housing • Mounts

• Cover of stainless steel
• Consists of stainless steel cover and security screws
• Reinforced dome (3mm polycarbonate)
• Ideally suited for surveillance at extremely critical locations

Article numbers:
MX-D24M-Vandal-ESMA (matt)
MX-D24M-Vandal-ESPO (polished)
MX-D24M-Vandal-PUGR (gray powder-coated)
MX-D24M-Vandal-PUBL (black powder-coated)
MX-D24M-Vandal-PUWH (white powder-coated)

• Vandalism-proof housing including lens protection with reinforced dome (3mm polycarbonate)
• Stainless steel, finish matt or polished
• Including security screws
• Ideally suited for surveillance at extremely critical locations

Article numbers:
MX-Q24M-Vandal-ESMA (matt, for Q25/Q24/Q22)
MX-Q24M-Vandal-ESPO (polished, for Q25/Q24/Q22)

• Cover of stainless steel
• Consists of stainless steel cover and security screws
• Reinforced dome (3mm polycarbonate)
• Ideally suited for surveillance at extremely critical locations
• Not compatible with Fix and/or Pano models

Article numbers:
MX-D15-Vandal-ESMA (matt)
MX-D15-Vandal-ESPO (polished)
MX-D15-Vandal-PUGR (gray powder-coated)
MX-D15-Vandal-PUWH (white powder-coated)
MX-D15-Vandal-PUBL (black powder-coated)

Standard vandalism kit protecting the v25 and v26, stainless steel ring grey, reinforced dome cover, 3 mm polycarbonate.

Article number:
MX-MT-v25-V

Extended vandalism kit protecting the v25 and v26 including the on-wall audio kit, stainless steel ring grey with bigger height, reinforced dome cover, 3 mm polycarbonate, cable screw connection.

Article number:
MX-MT-v25-V-XL

• For surveillance of one area with two sensor modules (in particular, for day and night)
• All available sensor modules S14D or S15D can be installed in the DualMount
  (not included)
• Concealed cabling, weatherproof from -30 to +60 °C (IP65)
• Suitable for ceiling installation, with a 25° tilt of the lenses

Article numbers:
MX-FLEX-OPT-DM-PW (DualMount, white)
MX-FLEX-OPT-DM-BL (DualMount, black)

• For surveillance of long and narrow spaces (e.g., bus, train, hallway, etc.) without blind spots
• Two sensor modules can be integrated in the SurroundMount (not included)
• Concealed cabling, weatherproof from -30 to +60 °C (IP65)
• Suitable for ceiling installation, with a 25° tilt of the lenses

Article numbers:
MX-FLEX-OPT-SM-PW (SurroundMount, white)
MX-FLEX-OPT-SM-BL (SurroundMount, black)

• Suitable for all sensor modules S14D and S15D
  (not included)
• Flexible setting of inner ring, sensor module can be tilted up to 20°
• High-quality metal design, available in five colors:
  • White
  • Black
  • Chrome
  • Matt chrome
  • Brushed nickel

Article numbers:
MX-HALO-EXT-PW (HaloMount, white)
MX-HALO-EXT-BL (HaloMount, black)
MX-HALO-EXT-CO (HaloMount, chrome)
MX-HALO-EXT-CM (HaloMount, matt chrom)
MX-HALO-EXT-NG (HaloMount, brushed nickel)

• Integrated speaker incl. mount, white or matt chrome
• Suitable for the installation in ceilings or walls, indoor (IP20)
• Compatible with all FlexMount cameras (mono and dual)
• Direct connection via two-wire cable, no additional power supply unit needed
• Inner ring with speaker can be tilted up to 20°

Article numbers:
MX-HALO-SP-EXT-PW (SpeakerMount, white)
MX-HALO-SP-EXT-CM (SpeakerMount, matt chrome)

• Easy, quick and concealed mounting with adhesive foil (e.g. behind a stainless steel plate)
• Speaker and microphone incl. connection cable included
• Use of the camera as a door station by connecting a bell module (firmware 4.1.9 and higher)
• Suitable for FlexMount mono cameras S14M and S15M

Article number:
MX-FLEX-OPT-AM-BL

• Manually adjustable dome mount for one sensor module (not included)
• Features three axes that allow it to compensate for sideway tilt and to re-align the image horizon horizontally when mounted to a wall
• Suitable for all available sensor modules for S14D/S15D (MX-SM-Dxx or MX-SM-Nxx)
• Concealed cabling, weatherproof from -30 to +60°C/-22 to 140°F (IP66)
• Suitable for ceiling or wall installation

Article numbers:
MX-PTMount-OPT-PW (PTMount, white)
MX-PTMount-OPT-BL (PTMount, black)

Extension

• 40mm/1.6 in. for sensor module
• increases the installation depth
• can be mounted directly onto the sensor modules themselves or onto existing extensions

Article number:
MX-S14-OPT-MK-EX

Extension set

Complete set for wall or ceiling mounting of a sensormodule using 15° wdges, incl.

• 1 x extension 40mm/1.6 in
• 2 x 15° wedges (white and black)
• 2 x wedge sealing rings
• 1 x nut

Article number:
MX-S14-OPT-MK-CW